Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2005 >> CTS V6-3.6L VIN 7 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Knock Sensor (KS) Replacement - Bank 1
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor (KS) Replacement - Bank 1



KNOCK SENSOR (KS) REPLACEMENT - BANK 1

REMOVAL PROCEDURE




- Turn the ignition OFF.
- Raise and support the vehicle. Refer to Vehicle Lifting.
- Reposition the wiring harness heat shield to obtain access.
- Remove the knock sensor (KS) electrical connector.




- Remove the KS bolt.
- Remove the KS.

INSTALLATION PROCEDURE




- Install the KS.
- Install the KS bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the KS bolt to 23 N.m (17 lb ft).




- Install the KS electrical connector.
- Install the wiring harness heat shield to the original position.
- Lower the vehicle.
pro multis · About Operation CHARM