Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disconnect/Connect Procedure



BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE

REMOVAL PROCEDURE
1. Turn off all the lamps and accessories.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Turn the ignition OFF.




3. Disconnect the battery negative cable (2) from the battery.

INSTALLATION PROCEDURE




1. Connect the battery negative (2) cable to the battery.

IMPORTANT: Clean any existing corrosion from the battery terminal, the battery cable bolt and the battery cable.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the battery cable bolt to 17 N.m (13 lb ft).

2. Power Windows calibration:
1. Repeat these steps for each window.
2. Turn the ignition switch to the RUN position.
3. Press the power window switch to the down position. After the window is in the full down position, press and hold the switch in the down position for 3 seconds.
4. Press the power window switch to the up position. After the window is in the full up position, press and hold the switch in the up position for 3 seconds.