Latch Replacement - Console Compartment Door (DTS, Upper)

Latch Replacement - Console Compartment Door (DTS, Upper)

Removal Procedure





1. Open the console compartment upper lid.
2. Remove the 4 screws (1) that retain the armrest inner trim panel (2).
3. Remove the armrest inner trim panel (2).
4. Remove the 2 screws holding the console armrest latch to the console armrest.
5. Remove the console armrest latch from the console armrest.



Installation Procedure





1. Install the console armrest latch to the console armrest.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws that retain the console armrest latch to the console armrest.

Tighten the screw that retains the front door trim plate to 2 N.m (18 lb in)

3. Install the armrest inner trim panel (2).
4. Install the armrest inner trim panel screws (1).

Tighten the screw that retains the front door trim plate to 2 N.m (18 lb in)

5. Check for proper operation of the console armrest latch, adjust the console lid latch if necessary.