Module Replacement - Ventilation Heat and Cool - Seat Cushion

MODULE REPLACEMENT - VENTILATION HEAT AND COOL - SEAT CUSHION

REMOVAL PROCEDURE
1. Remove the seat cushion bottom from the adjuster.




2. Disconnect the electrical connectors.
3. Remove the screws (1) that attach the module (2) to the seat cushion frame.
4. Remove the module from the cushion frame.

INSTALLATION PROCEDURE




1. Install the module to the cushion frame.
2. Install the screws (1) that attach the module (2) to the seat cushion frame.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 3 N.m (26 lb in).

3. Connect the electrical connectors.
4. Install the seat cushion bottom to the adjuster.