Removal and Replacement

Driver Information Center Switch Replacement

Removal Procedure

Caution: Refer toSIR Caution in Cautions and Notices.
1. Remove the IP cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Instrument Panel Cluster (IPC) - Trim Panel Replacement) .




2. Remove the fasteners from the drivers information switch.




3. Remove the drivers information switch from the IP cluster trim panel.



Installation Procedure





1. Install the drivers information switch to the IP cluster trim panel.

Notice: Refer to Fastener Notice in Cautions and Notices.





2. Install the fasteners.

Tighten the fasteners to 2 N.m (18 lb in).

3. Install the IP cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Instrument Panel Cluster (IPC) - Trim Panel Replacement) .