Head Up Display Replacement

HEAD UP DISPLAY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the I/P upper trim pad.

CAUTION: Refer to SIR Caution in Service Precautions.




2. Remove the fasteners (3) from the head up display (HUD) (1).
3. Disconnect the electrical connector (2) from the HUD.
4. Remove the HUD (1) from the instrument panel.

INSTALLATION PROCEDURE




1. Connect the electrical connector (2) to the HUD (1).
2. Install the HUD (1) to the I/P.
3. Install the fasteners (3) into the HUD (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fasteners to 2 N.m (18 lb in).

4. Install the I/P upper trim pad.