Tire Pressure Sensor Replacement (WC2 or WC8)

Tire Pressure Sensor Replacement (w/WC2 or WC8)
Removal Procedure
1. Raise the vehicle on a suitable support. Refer to Vehicle Lifting.
2. Remove the tire/wheel assembly from the vehicle.
3. Remove the tire from the wheel.
4. Remove the tire pressure sensor assembly from the tire insert.

Installation Procedure
1. Install the tire pressure sensor assembly on the tire insert.
2. Install the tire on the wheel.
3. Remove the sensor Id sticker from the outside surface of the wheel mounting flange and clean the flange surface with denatured alcohol.
4. Apply the new sensor Id sticker to the outside surface of the wheel mounting flange.
5. Install the tire/wheel assembly back on the vehicle.
6. Lower the vehicle.
7. With a scan tool, enter the new sensor Id number into the RCDLR,s memory. Programming and Relearning