Knee Bolster Replacement - Left (Without RPO UV2)

Knee Bolster Replacement - Left (Without UV2)

Removal Procedure

Important: The knee bolster trim panel (1) must be replaced, not repaired, if there is any visible damage.







1. Remove the knee bolster trim panel (1) by grasping at the top and the bottom and by pulling rearward.
2. Remove the knee bolster trim (1) from the vehicle.



Installation Procedure





1. Align the knee bolster trim (1) guide pins to the IP.
2. Push forward firmly in order to engage the clips to the IP retainer.