Seat Belt Replacement - Center Front

REMOVAL PROCEDURE
1. Remove the seat assembly.

CAUTION: Refer to SIR Caution in Service Precautions.




2. Drill out the rivet (1).

IMPORTANT: The center belt assembly is riveted to the front seat adjusting rail for in-plant assembly. The rivet does not need to be replaced.

3. Remove the center seat belt assembly.

INSTALLATION PROCEDURE




1. Install the center belt assembly to the seat assembly adjuster rail. The rivet (1) was installed for location purposes during production assembly and does not need to be reinstalled. However, if replaced seat installation difficulty may be reduced.
2. Install the seat assembly into the vehicle.

CAUTION: Make sure the anchor bolt is through the seat adjuster track and center belt holes. Failure to do so could result in system failure, leading to injury in the event of a collision.