Steering Wheel Position Sensor or Steering Shaft Lower Bearing

Steering Wheel Position Sensor or Steering Shaft Lower Bearing Replacement
Removal Procedure





1. Caution: Refer to Restraint Systems in Service and Precautions.

Disable the SIR system. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the steering column from the vehicle.
3. Remove the following from the steering shaft:
1. The boot seal (5)
2. The steering shaft seal (4)
3. The sensor retainer (3)
4. The sensor locator (2)
4. The steering wheel position sensor (1).

Installation Procedure





1. Install the following onto the steering shaft:
1. The steering wheel position sensor (1)
2. The sensor locator (2)
3. The sensor retainer (3)
4. The steering shaft seal (4)
5. The boot seal (5)
2. Install the steering column into the vehicle.
3. Enable the SIR system. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.