Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

HVAC Control Module Replacement

HVAC CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Turn the engine OFF.
2. Apply parking brake and place the transmission into the lowest gear setting.
3. Remove the screw behind the ashtray.
4. Remove the HVAC control module trim plate by pulling outward on right and left side.




5. Disconnect the HVAC control module electrical connector.
6. Disconnect the ash tray electrical connector.




7. Remove the HVAC control module screws (1).
8. Remove the HVAC control module.

INSTALLATION PROCEDURE




1. Install the HVAC control module into the trim plate.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the HVAC control module screws (1)

Tighten
Tighten the screws to 2 N.m (18 lb in).




3. Connect the HVAC control module electrical connector.
4. Connect the ash tray electrical connector.




5. Install the HVAC control module trim plate by pressing trim until tabs engage.
6. Install the screw behind the ashtray.

Tighten
Tighten the screw to 2 N.m (18 lb in).

7. Place the transmission in park and unapply the parking brake.