Driver Knee Bolster Bracket Replacement

DRIVER KNEE BOLSTER BRACKET REPLACEMENT

REMOVAL PROCEDURE
1. Remove the knee bolster trim.




2. Remove the screws (2) securing the knee bolster bracket to the I/P.
3. Remove the knee bolster bracket.

INSTALLATION PROCEDURE




1. Align the tabs (1) to the I/P carrier in order to install the knee bolster bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws (2) securing the knee bolster bracket to the I/P.

Tighten the fasteners to 9 N.m (80 lb in).
3. Install the knee bolster trim.