Automatic Level Control

DTC C0625

Circuit Description

The automatic level control (ALC) sensor provides a signal voltage between 0.3-4.7 volts to its internal module. This signal voltage represents the wheel's position relative to the body. The ALC module is internal to the ALC sensor, and no external circuits are involved.

DTC Descriptor

This diagnostic procedure supports the following DTC:
- DTC C0625 Left Rear Position Sensor Circuit.

This vehicle has DTCs which include DTC Symptoms. For more information on DTC Symptoms, refer to DTC Symptom Description.






Conditions for Running the DTC

At power-up and continuous when ignition is activated.

Conditions for Setting the DTC

The ALC control module senses a suspension sensor voltage below 0.3 volt or above 4.7 volts.

Action Taken When the DTC Sets

- ALC functionality is suspended.
- SERVICE AIR SUSPENSION message is displayed.

Conditions for Clearing the DTC

The DTC will clear when the condition for setting the DTC is removed.

Diagnostic Aids

This DTC is set for a high or low signal to the ALC control module from the position sensor. The ALC module is internal to the ALC sensor, and no external circuits are involved.