90000 MI or 144000 KM

Lubricate
    Doors
      Lubricate body components. Lubricate all key lock cylinders, hood latch assembly, secondary latch, pivots, spring anchor, release pawl, rear compartment hinges, outer liftgate handle pivot points, rear door detent link, roller mechanism, liftgate handle pivot points, latch bolt, fuel door hinge, cargo door hinge, locks and folding seat hardware. More frequent lubrication may be required when exposed to a corrosive environment. Applying silicone grease on weather-strips with a clean cloth will make them last longer, seal better and not stick or squeak.
Clean
    Throttle Body
      Inspect throttle body bore and valve plates for deposits, open the throttle valve and inspect all surfaces. Clean as required.
Inspect
    Wiper Blade
      Inspect wiper blades. Visually inspect wiper blades for wear or cracking. Replace blade inserts that appear worn or damaged or that streak or miss areas of the windshield.
    Washer Fluid
      Check windshield washer fluid level, and add fluid as needed.
    Vehicle
      Visually check for any leaks or damage. A fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed.
    Steering and Suspension
      Inspect steering and suspension components. Visually inspect front and rear suspension and steering system for damaged, loose or missing parts or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots and axle seals for leaks.
    Restraints and Safety Systems
      Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. (The air bag system does not need regular maintenance.)
    Fuel Supply Line
      Inspect the fuel system for damage or leaks.
    Fluid - A/T
      Check transmission fluid level and add fluid as needed.
    Exhaust System
      Inspect exhaust system for loose or damaged components.
    Cooling System
      Inspect engine cooling system. Visually inspect hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps. To help ensure proper operation, a pressure test of the cooling system and pressure cap and cleaning the outside of the radiator and air conditioning condenser is recommended at least once a year.
    Coolant
      Check engine coolant fluid level, and add fluid as needed.
    Brakes and Traction Control
      Inspect brake system. Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
    Air Filter Element
      Inspect engine air cleaner filter. If necessary, replace filter.
Replace
    Oil Filter, Engine
    Engine Oil
      Change engine oil and filter, or every 12 months, whichever occurs first. Reset indicator.
    Cabin Air Filter / Purifier
      Replace the passenger compartment air filter. If the vehicle is driven regularly under dusty conditions, the filter may require replacement more often.
Rotate
    Tires
      Rotate tires and check inflation pressures and wear.