Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2006 >> STS AWD V8-4.6L VIN A >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Battery Current Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Current Sensor: Service and Repair



BATTERY CURRENT SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the instrument panel (I/P) harness electrical connector (1) from the battery current sensor.
2. Remove the negative battery cable.




3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
4. Squeeze the negative battery cable branches together.
5. Slide the battery current sensor (1) off of the negative battery cable.

IMPORTANT: Note the position of the battery current sensor prior to removal.

INSTALLATION PROCEDURE




1. Slide the NEW battery current sensor (1) up onto the negative battery cable.

IMPORTANT: Ensure that the tape tab is pointing away from the battery prior to installation.

2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.




3. Install the negative battery cable.
4. Connect the I/P harness electrical connector (1) to the battery current sensor.
pro multis · About Operation CHARM