71. Oil Pump Assemble

Oil Pump Assemble




1. Install the oil pump body to oil pump cover alignment dowels.





Notice: Refer to Fastener Notice.

2. Install the oil pump relief valve plunger, relief valve spring and relief valve plug.

Tighten the oil pump relief valve plug to 12 N.m (106 lb in).




3. Install the oil pump driven and drive gears. The outer driven gear has one chamfered edge. The chamfered edge of the driven gear must face-down into the oil pump body.
4. Pack the pump body housing with clean white petroleum jelly to ensure pump priming.




5. Install the oil pump body cover.
6. Install the oil pump body bolts.

Tighten the oil pump body bolts to 12 N.m (106 lb in).




7. Install the oil pump drive spacer.