Scan Tool Data List

Scan Tool Data List (5L40-E/5L50-E)

Use the Scan Tool Data List under the following conditions:

* The Diagnostic System Check - Vehicle has been completed
* The On-Board Diagnostics are functioning properly
* No DTCs are present

Important: Do not use a scan tool that displays faulty data. Report the condition to the scan tool manufacturer. The use of a faulty scan tool can result in misdiagnosis and the unnecessary replacement of parts.

Only the parameters listed below are used in this Service Data for diagnosing. If a scan tool displays other parameters, the values are not recommended by General Motors for use in diagnosis.

Scan tool values below were recorded under the following conditions:

* Engine at idle
* Upper radiator hose is hot
* Closed throttle
* Transmission in PARK
* Closed loop operation
* Accessories OFF
* Brake pedal not applied