Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Transmission Replacement



Wiper Transmission Replacement

Tools Required
* J 39232 Wiper Linkage Separator
* J 39529 Wiper Linkage Installer

Removal Procedure




1. Remove the wiper arms (1,4).
2. Remove the air inlet grille panel.




3. Pull or push on the wiper transmission linkage to rotate the wiper motor crank arm (2) from the park position (1) to the area opposite the park position (3).




4. Disconnect the wiper motor harness connector (4).
5. Remove the 2 screws (3,5) retaining the wiper system drive module.
6. Remove the wiper system drive module (1) from the vehicle.




7. Remove the drive links from the wiper motor crank arm and the wiper transmission drive shafts with the J 39232.
8. Remove the transmission links from the module.

Installation Procedure




1. Position the transmission drive links (4) to the pivot arms (3,5).




2. Install the drive links onto the wiper motor crank arm and the wiper transmission drive shafts with the J 39529.




3. Install the wiper motor module assembly.




4. Install the air inlet grille panel.
5. Install the wiper arms (1,4).
6. Operate the wipers and check for proper operation.