Instrument Panel Accessory Trim Plate Replacement

Instrument Panel Accessory Trim Plate Replacement

Removal Procedure




1. Remove the console trim plate.
2. Grasp the I/P accessory trim plate at the top edge and pull rearward to disengage the retaining clips.

Important: Do NOT damage the metal accent trim on the trim plate.

3. Disconnect the electrical connector at the hazard flasher switch.
4. Remove the hazard flasher switch from the trim plate.

Installation Procedure




1. Install the hazard flasher switch to the trim plate.
2. Connect the electrical connector to the hazard flasher switch.
3. Install the I/P accessory trim plate securing the plate into the retaining clips.
4. Install the console trim plate.