Variable Induction System: Service and Repair

Intake Manifold Runner Control Solenoid Replacement (LP1, LY7)

Removal Procedure






Important: DO NOT separate the upper intake manifold from the lower intake manifold.


1. Remove the upper intake manifold with the lower intake manifold. Refer to Lower Intake Manifold Replacement (LP1, LY7) (Service and Repair) .
2. Remove the intake manifold runner control solenoid bolts.
3. Remove the intake manifold runner control solenoid.



Installation Procedure





1. Install the intake manifold runner control solenoid.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the intake manifold runner control solenoid bolts.

Tighten the intake manifold runner control solenoid bolts to 10 N.m (89 lb in).

3. Install the upper intake manifold. Refer to Lower Intake Manifold Replacement (LP1, LY7) (Service and Repair) .