Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
58. Oil Pan Cleaning and Inspection
Oil Pan Cleaning and Inspection
1. Remove the oil filter fitting (438), as required.
2. Remove the active fuel management oil pressure relief valve (455) and washer.
3. Inspect the oil pressure relief valve for proper operation. Lightly depress the valve (2). The valve spring (1) should seat the valve to the proper closed position.
4. Remove the oil level sensor (727) and O-ring (728).
5. Remove the bolts (427) and baffle (428).
6. Remove the oil pan bolts (435), cover (434), and gasket (433).
7. Clean the oil pan in solvent.
Warning
Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
8. Dry the oil pan with compressed air.
9. Inspect the oil pan for the following conditions:
* Damaged gasket surfaces (1)
* Restrictions within the oil passages (2) of the pan
* Damaged oil filter seal surface (3)
* Threaded oil level sensor hole (4) for damage