Pressure Regulating Solenoid: Service and Repair

Automatic Transmission Range Selector Lever Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the range selector lever cable heat shield bolts (1).
3. Remove the range selector lever cable heat shield (2).




4. Disconnect the range selector lever cable (2) from the range select lever.
5. Remove the range selector lever cable retainer (1).
6. Remove the range selector lever cable (2) from the cable bracket.




7. Remove the range selector lever nut (1).
8. Remove the range selector lever (2).

Installation Procedure




1. Install the range selector lever (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the range selector lever nut (1).

Tighten the nut to 25 Nm(18 lb ft).




3. Install the range selector lever cable (2) to the cable bracket.
4. Install the range selector lever cable retainer (1).
5. Connect the range selector lever cable (2) to the range select lever.




6. Install the range selector lever cable heat shield (2).
7. Install the range selector lever cable heat shield bolts (1).

Tighten the bolts to 17 Nm(13 lb ft).

8. Lower the vehicle.