Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2009 >> Escalade ESV AWD V8-6.2L >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> 175 Amp Mega Fuse Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

175 Amp Mega Fuse Replacement




175 Amp Mega Fuse Replacement

Removal Procedure




1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Remove the fuse cover.




3. Remove the starter solenoid cable nut (1) from the fuse stud.
4. Remove the starter solenoid cable terminal (2) from the fuse stud.




5. Remove the generator battery jumper cable to fuse nut (3).
6. Remove the generator battery jumper cable terminal (4) from the fuse stud.
7. Remove the positive battery cable terminal from the fuse stud.




8. Remove the fuse from the holder.

Installation Procedure




1. Install the fuse to the holder.




2. Install the positive battery cable terminal to the fuse stud.
3. Install the generator battery jumper cable terminal (4) to the fuse stud.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the generator battery jumper cable to fuse nut (3).

Tighten the nut to 15 Nm(11 lb ft).




5. Install the starter solenoid cable terminal (2) to the fuse stud.
6. Install the starter solenoid cable nut (1) to the fuse stud.

Tighten the nut to 15 Nm(11 lb ft).




7. Install the fuse cover.
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).

pro multis · About Operation CHARM