Electronic Brake Control Module: Testing and Inspection

Electronic Brake Control Module Programming and Setup

EBCM Programming and Setup - Hybrid

If the electronic brake control module (EBCM) is replaced or needs reprogrammed, the following procedures must be performed:

* EBCM Reprogramming-Refer to Service Programming System (SPS) (Programming and Relearning).
* Perform the module setup EBCM Relearn.
* Perform the module setup Acceleration Sensor Reset.
* Perform the module setup BMC Prim. Piston Pos. Relearn.

EBCM Programming and Setup - Non-Hybrid Less than 3900 kg (8600 lb) GVW

If the electronic brake control module (EBCM) is replaced or needs reprogrammed, the following procedures must be performed:

EBCM Reprogramming-Refer to Service Programming System (SPS) (Programming and Relearning).

EBCM Programming and Setup - Non-Hybrid Greater than/Equal to 3900 kg (8600 lb) GVW

If the electronic brake control module (EBCM) is replaced or needs reprogrammed, the following procedures must be performed:

EBCM Reprogramming-Refer to Service Programming System (SPS) (Programming and Relearning).