Auxiliary Evaporative Emission Canister Replacement

Auxiliary Evaporative Emission Canister Replacement

Removal Procedure

Important: Clean the evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the fittings in order to avoid possible EVAP system contamination.





1. Remove the EVAP canister vent solenoid valve. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement (Service and Repair).
2. Disconnect the EVAP pipe quick connect fitting (3) from the auxiliary EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service).




3. Remove the auxiliary EVAP canister nuts (1).




4. Remove the auxiliary EVAP canister (1) from the vehicle.

Installation Procedure




1. Install the auxiliary EVAP canister (1) to the vehicle.




2. Install the auxiliary EVAP canister nuts (1).




3. Connect the EVAP pipe quick connect fitting (3) to the auxiliary EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service).
4. Install the EVAP canister vent solenoid valve. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement (Service and Repair).