Parking Assist Control Module: Service and Repair

Rear Object Alarm Module Replacement

Removal Procedure

1. Remove the rear upper compartment trim. Refer to Rear Compartment Trim Panel Replacement (Service and Repair).




2. Release the tabs securing the rear park assist module (3) to the module bracket.
3. Disconnect the electrical connectors.

Installation Procedure




1. Connect the electrical connectors.
2. Install the module (3) to the bracket.
3. Install the rear upper compartment trim. Refer to Rear Compartment Trim Panel Replacement (Service and Repair).
4. Refer to Control Module References (Programming and Relearning) for programming and setup information.