JE5, JL9

Front Brake Rotors

Rotor Minimum Thickness* 28.5 mm (1.122 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)

Rear Brake Rotors

Rotor Minimum Thickness* 24.0 mm (0.944 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)

* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below specification.