Crankshaft Position Sensor: Service and Repair

Crankshaft Position Sensor Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Disconnect the crankshaft position (CKP) electrical connector (3).




3. Remove the crankshaft sensor bolt.
4. Remove the crankshaft sensor.

Installation Procedure




1. Install the crankshaft position sensor.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the crankshaft position sensor bolt and tighten to 10 Nm (89 lb in).




3. Connect the CKP electrical connector (3).
4. Lower the vehicle.