Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2010 >> CTS Wagon AWD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Knock Sensor Replacement - Bank 2
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor Replacement - Bank 2




Knock Sensor Replacement - Bank 2

Removal Procedure




1. Turn the ignition OFF.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Remove the wiring harness heat shield from the oil level indicator tube to gain access.
4. Remove the knock sensor (KS) electrical connector.




5. Remove the KS bolt.
6. Remove the KS.

Installation Procedure




1. Install the KS.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the KS bolt and tighten to 23 Nm (17 lb ft).




3. Install the KS electrical connector.
4. Install the wiring harness heat shield to the oil level indicator tube.
5. Lower the vehicle.

pro multis · About Operation CHARM