Front Wheel Drive Intermediate Shaft Removal

Front Wheel Drive Intermediate Shaft Removal

Special Tools
* DT-113-2-A - Holder
* DT-622-A - Transmission Bracket

For equivalent regional tools, refer to Special Tools (AM-TE-PTU - Transfer Case).




1. Secure the transfer case (3) in DT-113-2-A - holder (1) , using the DT-622-A - bracket (2).




2. Install a sheet metal screw (2) into outer surface of seal and remove the shaft dirt deflector and grease seal assembly with suitable pliers.
3. DISCARD the shaft dirt deflector and grease seal assembly (1).




4. Remove the transfer case intermediate shaft retaining ring (1), using suitable snap ring pliers.




5. Remove the transfer case intermediate shaft (1), with bearing, using a rubber mallet.