Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2011 >> Escalade AWD V8-6.2L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair >> Brake Pedal Position Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pedal Position Sensor Replacement




Brake Pedal Position Sensor Replacement

Removal Procedure




1. Remove the driver knee bolster. Refer to Knee Bolster Replacement .
2. Remove the fuse block cover.
3. Disconnect the brake pedal position sensor electrical connector (1).
4. Remove the brake pedal position sensor bolts (2).
5. Remove the brake pedal position sensor (3) from the vehicle.

Installation Procedure




1. Install the brake pedal position sensor (3) to the vehicle.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the brake pedal position sensor bolts (2) and tighten to 9 Nm (80 lb in).
3. Connect the brake pedal position sensor electrical connector (1).
4. Install the fuse block cover.
5. Install the driver knee bolster. Refer to Knee Bolster Replacement .

pro multis · About Operation CHARM