Connecting Rod, Engine

Connecting Rod Bolt
First Pass 30 Nm (22 lb ft)
Second Pass - Counterclockwise Back Off to Zero
Third Pass 25 Nm (18 lb ft)
Final Pass 110 Degrees

Connecting Rod Bore Diameter
Bearing End 59.620-59.636 mm (2.3472-2.3479 in)
Pin End - Production 24.009-24.019 mm (0.9452-0.9456 in)
Pin End - Service Maximum 24.021 mm (0.9457 in)

Connecting Rod Length - Center to Center 152.400 mm (6.0000 in)
Connecting Rod Side Clearance 0.095-0.355 mm (0.0374-0.0140 in)

Connecting Rod Width - Bearing End
Production 21.775 mm (0.8573 in)
Service 21.725-21.825 mm (0.8553-0.8593 in)

Connecting Rod Width - Pin End
Production 21.775 mm (0.8573 in)
Service 21.725-21.825 mm (0.8553-0.8593 in)