Cylinder Head Assembly

CYLINDER HEAD

Right Sequence:

Left Sequence:

M11 cylinder head bolts

First pass in sequence to 30 Nm (22 lb ft)
Second pass in sequence an additional 150 degrees

M8 cylinder head bolt

First pass to 15 Nm (11 lb ft)
Second pass an additional 75 degrees

Re-Usability

Note: DO NOT reuse the old cylinder head bolts.

CAMSHAFT BEARING CAP

Right (DI):

Left (DI):

Camshaft Cap Bolt 10 Nm (89 lb in)

Intake Manifold Intake Manifold

Exhaust Manifold Exhaust Manifold

Camshaft Gear/Sprocket Camshaft Gear/Sprocket