Tremec 6-Speed - Manual Transmission

Vehicle Speed Sensor Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Disconnect the vehicle speed sensor electrical connector.
3. Remove the attaching bolt and the vehicle speed sensor.
4. Remove the vehicle speed sensor (1).

Installation Procedure




1. Install the vehicle speed sensor (1).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the vehicle speed sensor bolt and tighten to 10 Nm (89 lb in).
3. Connect the vehicle speed sensor electrical connector.
4. Lower the vehicle.