Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

19. Cylinder Head Removal - Left Side

Cylinder Head Removal - Left Side

Note: The cylinder head bolts are of a torque-to-yield design and are NOT to be used again. Install NEW cylinder head bolts during assembly.

1. Remove the cylinder head bolts (220, 221).

Caution: After removal, place the cylinder head on 2 wood blocks in order to prevent damage to the sealing surfaces.

2. Remove the cylinder head (218).

3. Remove the gasket (217) and locating pins (230).
4. Discard the gasket and cylinder head bolts.