Cylinder Head Assembly: Service and Repair
V6-229, 262 & ALL V8 ENGINES EXC. 1984-88 CORVETTECylinder Head Sequence:
1. Disconnect battery ground cable, then drain cooling system and engine block.
2. Remove intake manifold and exhaust manifolds.
3. Remove alternator lower mounting bolt and position alternator aside.
4. If equipped with A/C, remove compressor and forward mounting bracket and position aside.
5. Remove rocker arm cover, rocker arms and pushrods.
NOTE:
Keep rocker arm, rocker arm balls and pushrods in order so they can be installed in the same position.
6. On all except 1982 Corvette, remove diverter valve.
7. Remove cylinder head bolts and cylinder head.
8. Reverse procedure to install. Apply suitable sealer to cylinder head bolts and gradually torque bolts to specifications.