Wheels - Wire Wheel Cover Noisy At Low Speeds

85-26
3E (X)
Jan., 1985
Subject: WIRE WHEEL COVER NOISE
Model and Year: 1982-85 MODELS

WIRE WHEEL COVER:

TO: ALL CHEVROLET DEALERS


Some wire wheel covers may have a snapping or creaking noise when driving at low speeds. This noise may be caused by the wheel cover flexing on the wheel. This condition can be corrected by removing the wheel covers and placing them upside down on a covered bench. Then center punch and drill four (4) 1/4" holes evenly spaced in the wheel cover (see illustration). Holes should be drilled on the second step of the cover from the inboard side. Install the four (4) nylon clips, P/N 411700, in the drilled holes.
WARRANTY INFORMATION

Labor Operation Number: T4080

Labor Time : .3 hour; four (4) - .5 hour

Trouble Code : 40

With Locking Wheel
Covers : One (1) - .1 hour

Two or More - .2 hour