Choke Rod

Fig. 10 Choke rod adjustment:

The choke coil lever and fast idle adjustments must be made before performing this adjustment.
1. Rotate degree scale until zero is opposite pointer, then with choke valve completely closed, place magnet on top of choke valve and rotate bubble until centered, Fig. 10.
2. Rotate scale so specified degree for adjustment is opposite pointer.
3. Place fast idle screw on second step of cam against shoulder of high step.
4. Close choke by pushing intermediate choke lever. Attach rubber band to intermediate choke lever to hold choke valve closed.
5. Push vacuum break lever toward open choke position until lever contacts rear tang on choke lever.
6. To adjust, bend fast idle cam rod until bubble is centered.