Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Computers and Control Systems: Adjustments


Refer to Diesel Engine Performance Specifications chart for specified curb and fast idle speeds.

CURB IDLE SPEED ADJUST

1. Set parking brake, then block drive wheels.
2. Position transmission shift lever in Neutral, then connect suitable tachometer following tool manufacturer's instructions.


Fig. 4 Curb & Fast Idle Speed Adjustments:





3. Start engine and allow to reach normal operating temperature.
4. Loosen idle speed adjusting screw locknut, then turn adjusting screw inward or outward until specified curb idle speed is obtained, Fig. 4.
5. Tighten locknut, stop engine and disconnect tachometer from engine.

FAST IDLE SPEED ADJUST

1. Set parking brake, then block drive wheels.
2. Position transmission shift lever in Neutral, then connect tachometer following tool manufacturer's instructions.
3. Start engine and allow to reach normal operating temperature.
4. Apply vacuum to fast idle actuator, then loosen fast idle adjusting screw locknut, Fig. 4.
5. Turn knurled adjusting nut inward or outward and set fast idle speed to specification.
6. Tighten locknut, stop engine and disconnect tachometer from engine.