Differential Assembly
| Carrier Type | Integral | ||
| Ring Gear & Pinion Backlash | Method | Shims | |
| Adjustment Note: Side gear backlash. | .005-.008 Inch (in) | ||
| Pinion Bearing Preload | Method | Spacer | |
| New Bearing Note: Measured with torque wrench at pinion flange nut. | NDH Bearing | 10- 20 Inch Pound-Force (in.lb) | |
| Timken Bearing | 5- 15 Inch Pound-Force (in.lb) | ||
| Used Bearing Note: Measured with torque wrench at pinion flange nut. | 5-10 Inch Pound-Force (in.lb) | ||
| Differential Bearing Preload | Method | Shims | |
| New Bearing | Slip Fit Note: plus .004 preload on each side. | ||
| Used Bearing | Slip Fit Note: plus .004 preload on each side. |