Instrument Panel Cluster Printed Circuit Replacement

1. Disconnect battery ground cable.
2. Disconnect speedometer cable at transmission.
3. Remove steering column trim panel.
4. Lower steering column.
5. Remove steering column trim cover.
6. Remove switch from bezel, allow bezel and other switch to hang.
7. Remove cluster screws and remove cluster.
8. Disconnect electrical connector and speedometer cable.
9. Remove cluster lens.
10. Remove speedometer head assembly. Remove clock and tachometer, if necessary.
11. Remove all bulbs.
12. Remove seat belt buzzer.
13. Remove coolant temperature gauge and fuel gauge.
14. Remove seat belt buzzer timer.
15. Remove printed circuit.
16. Reverse procedure to install.