Condenser HVAC: Service and Repair

1. Open the hood and disconnect the battery negative cable.
2. Discharge the system.
3. Remove the radiator cap.
4. Remove the accumulator hold-down clamp and set accumulator to one, side.
5. Remove the accumulator at the frame.
6. Remove the fan to upper shroud attaching screws.
7. Remove the upper shroud attaching screws and move the shroud rearward.
8. Disconnect the condenser inlet and outlet fittings and install new "0" rings.
9. Remove the condenser from its carrier.
10. Add oil to the new condenser, install by reversing the removal procedure, evacuate the system, charge and check operation.