Removal

Heater Core Case:

REMOVE
1. Open hood and disconnect the battery negative cable.
2. Remove the instrument cluster bezel including the tilt wheel lever and I.P. pad.
3. Remove the A/C distributor duct and disconnect the flex hose.
4. Remove the right side hush panel.
5. Remove the side window defroster flex hose.
6. Remove the side window defroster to heater cover screws and disconnect the extension.
7. Remove the temperature control cable and bracket assembly at heater cover including disconnecting heater door control shaft.
8. Remove the Electronic Control Module (ECM) and disconnect the electrical connectors.
9. Remove the tubular support brace from the door pillar to aluminum, instrument panel reinforcement brace.
10. Remove heater core cover attaching screws.
11. Remove heater pipe and heater water control bracket attaching screws.
12. Cut heater hose at heater core pipes, measure, cut and replace when reinstalling.
13. Remove the heater core.