Main Bearing

R-4 Compressor Component View:

Remove or Disconnect

Tools Required:
J 24895 Bearing Installer
J 24896 Bearing Remover

1. Rotor (5) and bearing (6) assembly.
2. Front head (15) and seal (17).

Removing The Bearing From The Front Head:

3. Bearing (16) from the front head (15).
^ Place the front head on two blocks.
^ Drive the bearing out of the front head with J 24896.

Install or Connect

Tool Required:
J 24895 Bearing Installer

Installing The Bearing:

1. Bearing (16) to the front head (15).
^ Place the bearing with the neck down on a flat surface.
^ Drive the bearing into the front head with J 24896.
2. Front head (15) and seal (17) to the compressor
3. Rotor (5) and bearing (6) assembly.