Drive Belt: Service and Repair

Fig. 17 Serpentine Drive Belt Routing. 1987-91:

Fig. 18 Serpentine Drive Belt Routing. 1992:

1. Insert a 1/2 inch breaker bar into the tensioner pulley.
2. Rotate tensioner counterclockwise, then remove drive belt.
3. Route drive belt over all pulleys except the water pump.
4. Insert a 1/2 inch breaker bar into the tensioner pulley.
5. Rotate tensioner counterclockwise then slip belt over water pump pulley.
6. Ensure proper belt tracking around each pulley.