Installation of Transmission Fluid Dipstick

1. LOCATE VEHICLE IDENTIFICATION NUMBER (VIN) PLATE. It appears in the front corner of the instrument panel on the driver's side. The VIN plate can be seen if you look through the windshield from outside of the vehicle. The eighth character (from left) is your engine code. THIS CHARACTER WILL BE A "Z" OR "W".

2. Open your vehicle's hood.

NOTICE:
Use prop rod to support hood in open position.

3. Locate transmission fluid level dipstick which is near the front of the engine compartment wall. The dipstick has a black T-shaped handle marked "TRANS FLUID".


4. Remove old dipstick from fill tube and dispose of it.

NOTICE:
DISCARD DIPSTICK IMMEDIATELY. KEEP OUT OF THE REACH OF CHILDREN.

5. Wipe new dipstick clean and insert new dipstick all of the way into transmission fill tube.

6. Close vehicle's hood.

7. Check "Campaign Completed By Owner" box on enclosed postage paid reply card and return the card to us.