Front Suspension

Fig. 1 Front Suspension:

Fig. 2 Exploded View Of Front Suspension. Except GTZ Models:

Fig. 3 Exploded View Of Front Suspension. GTZ Models:

The front suspension, Figs. 1 through 3, on these vehicles is of the MacPherson strut design. The lower control arms pivot from the lower side rails through rubber bushings. The upper end of the strut is isolated by a rubber mount incorporating a nonserviceable bearing for wheel turning. The tie rods connect to the steering arm on the strut, below the spring seat. The lower end of the steering knuckle pivots on a ball stud which is retained to the lower control arm by rivets and is secured to the steering knuckle with a nut and cotter pin. The sealed wheel bearings are integral with the hub and are serviced as an assembly.