Cleaning & Inspection

1. Clean components in suitable solvent and blow dry with compressed air, noting the following:
a. Do not use brush when cleaning bearings.
b. Do not ``spin dry'' bearings, as bearings will be damaged.
c. Lightly lubricate components after cleaning to retard corrosion.
d. Keep all components in order to ensure proper assembly.
2. Inspect gears for cracks, chipped teeth, wear and scoring, and damaged bearing or mounting surfaces. Replace gears that are damaged or excessively worn.
3. Inspect differential case for cracks, damage, worn side gear bores and scored bearing surfaces and replace as needed.
4. Inspect housing for scored bearing mount surfaces, cracks and distortion, and replace as needed.
5. Inspect bearing rollers and races for pitting, scoring, overheating and damage.
6. Mate bearing with race and check operation.
7. Replace any bearing that is damaged, excessively worn or that fails to operate smoothly.