Rear Oil Retainer Bearing & Seal

Fig. 14 Installing Rear Oil Retainer Seal. Two Wheel Drive Models Without Drive Line Brake:

Fig. 15 Installing Rear Oil Retainer Seal. Two Wheel Drive Models With Drive Line Brake:

Two Wheel Drive Models
1. Pry out seal with small pry bar or equivalent.
2. Remove retaining ring and bearing from extension housing.
3. Install new bearing into extension housing using extension housing bearing installer tool No. J-38807 or equivalent.
4. Install retaining ring.
5. Install new seal using extension housing seal installer tool No. J-22834 or equivalent, Figs. 14 and 15.