Circuit Check - Brake Signal

Brake Signal Diagnostic Chart:

Brake Signal Circuit:

Circuit Description:
The normally closed brake switch supplies a 12 volt signal on CKT 420 to the PCM/TCM. The signal voltage is removed when the brakes are applied. An incorrect brake signal may affect TCC operation.

Test Description:
Number(s) below refer to circled number(s) on the diagnostic chart.

1. Checks for voltage at brake switch.

2. This test simulates brake switch closed or brakes "OFF".

3. Checks CKT 420 from brake switch to PCM/TCM.

4. This opens CKT 420 and simulates brakes being applied.


Diagnostic Aids:
^ - Intermittent Malfunctions
^ Check customer driving habits and/or unusual traffic conditions (i.e. stop and go expressway traffic).